Home Protection

Technology & Product Overview

Contact us

RUCOCIDE B-AG

Water based anti-microbial preservative based on silver ions technology

  • Water based anti-microbial preservative based on silver ions technology
  • Bacteriocidal and slightly fungicidal properties
  • Resistant to higher temperatures
  • Stable at pH 3 – 11
  • BfR-registration card No.: 3063659
  • Registered according to the European biocide product regulation in Germany: N-54157
  • EPA-registration No.: 84189-2

Addition level and application: For the antimicrobial protection of coatings, plasters and similar products in areas with high room hygienic requirements like hospitals, clinics, commercial kitchens. Normal addition levels are in the range 0,05 – 0,5%.

Chemical description: Preparation of inorganic salts and surfactants, anionic

Active substance: Approx. 10 %

Solvent: Water

Appearance: White, milky suspension

RUCOSIL® B-TF

Co-binder in silicone resin emulsion paints and plaster

  • Co-binder in silicone resin emulsion paints and plaster
  • highly water repellent
  • high water vapour permeability
  • high early water resistance
  • low soiling tendency
  • film former
  • solvent-free
  • effective even with very low application quantities
  • resistant to alkali

Addition level and application: Silicone resin paint: 2 - 10 %; Silicone resin plaster: 2 - 6 %; SiSi-plaster: 2 - 4 % (calculated on total formulation)

Chemical description: Emulsion of a modified polysiloxane resin

Active substance: Approx. 50 %

Solvent: Water

Appearance: Milky, white, liquid

Request brochure





RUCOSIL® B-HA

Hydrophobizing additive for water based masonry coatings for example silicone resin paints and plaster, acrylic paints and plaster, silicate paints and plaster

  • highly water repellent
  • no influence on water vapour permeability
  • high early water resistance
  • beading effect
  • solvent-free

Addition level and application: Silicone resin paint/plaster: 0.5-1.5 %; Acrylic paint/plaster: 1 - 3 %; Silicate paint/plaster: 1 - 3 % (calculated on total formulation)

Chemical description: Emulsion of a functional polysiloxane

Active substance: Approx. 50 %

Solvent: Water

Appearance: Milky, white, liquid

Request brochure





RUCOSAN® B-WB

Masonry water repellent for the formulation of water based impregnations and primers for mineral substrates

  • highly water repellent
  • no influence on water vapour permeability
  • high early water resistance
  • strong beading effect
  • solvent-free
  • low soiling tendency
  • high penetration depth
  • prevention of blooming of soluble salts

Addition level and application: The product is to be diluted with water. A dilution of 5 - 20 % on solid content is recommended.

Chemical description: Emulsion of silanes and modified polysiloxanes

Active substance: Approx. 50 %

Solvent: Water

Appearance: Milky, white, liquid

Request brochure





RUCOSAN® B-CM 80

Water repellent in cream form to use as a horizontal barrier against rising damp; also suitable for impregnation of mineral substrates mainly concrete

  • very high active content
  • highly water-repellent
  • does not influence permeability to water vapor
  • pressure-free application possible
  • highly penetrating
  • horizontal barrier against rising damp
  • prevents salt blooming and
  • efflorescence

Addition level and application: The product is used undiluted. It can easily be applied by manual injection guns against rising damp in walls. The cream is brought pressure-free into horizontal drillings.

Chemical description: Blend based on silanes and modified polysiloxanes

Active substance: Approx. 80 %

Solvent: Isoparaffine hydrocarbons

Appearance: White, creamy

Request brochure

RUCOSIL® B-FF

Formaldehyde scavenger for water based indoor paints and plasters in liquid form

  • efficient reduction of formaldehyde
  • content in aqueous formulations and in the surrounding air
  • easy dosing
  • no yellowing
  • solvent-free

Addition level and application: 0,5 – 1,0 % (calculated on total formulation) The product can be added at any time of production

Chemical description: Solution of carboxamides

Active substance: Approx. 50 %

Solvent: Water

Appearance: Colourless, clear, liquid

Request brochure





RUCOSIL® B-FF 100

Formaldehyde scavenger for water based indoor paints and plasters in powder form

  • efficient reduction of formaldehyde
  • content in aqueous formulations and in the surrounding air
  • easy dosing
  • no yellowing
  • solvent-free

Addition level and application: 0,25 - 0,50 % (calculated on total formulation) The product can be added at any time of production

Chemical description: Blend of carboxamides

Active substance: 100 %

Solvent: Powder

Appearance: White powder

Request brochure

RUCOSIL® EPV 3559

Solvent-free additive for adjusting the pH-value of aqueous coatings like interior paints based on acrylics.

  • stable adjusting of pH-values between 11,0 – 12,0
  • easy dosage
  • VOV / SVOC-free
  • Water Hazard Class 1

Addition level and application: 1,0 – 3,0 % (calculated on total formulation)

Chemical description: Inorganic phosphate compounds

Active substance: Approx. 20 %

Solvent: Water

Appearance: Colourless, clear, liquid

Request brochure





Get in touch with us

RUDOLF GROUP offers strong solutions for the construction chemicals industry! We are happy to assist you in implementing our products to your product portfolio.

Contact us