3D pleats & easy care

for Denim

CONTACT US

RUCON® X-FAC

Permanent pleat fixation/Easy care finish; Creation of 3D effects

Standard 100 by OEKO-TEX® (Class II-IV)
ZDHC MRSL compliant
Actual application for ZDHC Chemical Gateway: Level 0

  • Crosslinking agent for the low-formaldehyde resin finishing of wovens and knitwear made from cellulosic fibres and their blends with synthetic fibres
  • Applicable to made-up garments
  • Does not require an additional catalyst system
  • Results in very low formaldehyde values if cured adequately
  • Good easy-care properties and high dimensional stability of the finished goods
  • Produces wash-and-wear effects that are stable at the boil
  • No or only slight changes of shade
  • Produces chlorine-resistant finishes
  • Causes lower losses of tear fastness than conventional reactant crosslinking agents
  • Highly compatible with most auxiliaries used in resin finishing, such as additives, softening and filling agents, water, oil and soil repellent agents and brighteners
  • Perfectly suitable for creating 3D effects
  • Strong blocking agent for indigo when oxidants are applied subsequently to 3D tagging
  • In the case of oxidant application after 3D tagging: Preferably for dark shades (avoid on lighter shades due to too strong contrasts at the 3D pleat area bleaching
  • For 3D effect creation on lighter shades: RUCON® FNF is to be preferred

Chemical basis: Modified N-methylol dihydroxyethylene urea with incorporated catalyst system
Ionic character: Uncharged

RUCON® FEC

Permanent pleat fixation/Easy care finish

Standard 100 by OEKO-TEX® (Class II-IV)
ZDHC MRSL compliant
Actual application for ZDHC Chemical Gateway: Level 0

  • Crosslinking agent for the low-formaldehyde resin finishing of textiles made from cellulosic fibres or their blends with synthetic fibres.
  • Good easy-care properties and high dimensional stability of the finished goods
  • Results in very low formaldehyde values if catalysed and cured adequately (low-formaldehyde product, under 75 ppm acc. to Law 112)

Chemical basis: N-methylol dihydroxy ethylene urea, modified
Ionic character: Uncharged

RUCON® FNF

Permanent pleat fixation/Easy care finish; Creation of 3D effects

Standard 100 by OEKO-TEX® (Suitable for class I-IV)
ZDHC MRSL compliant
Actual application for ZDHC Chemical Gateway: Level 0

  • Crosslinking agent for a formaldehyde-free resin finishing of textiles made of cellulosic fibres or their blends with synthetic fibres.
  • High liquor stability even with strong catalysts
  • Results in formaldehyde-free finishing effects if catalysed and cured correctly
  • Complies with the requirements of zero formaldehyde according to OEKO-TEX Standard 100, class I
  • Perfectly suitable for creating 3D effects
  • Blocking agent for indigo when oxidants are applied subsequently after 3D tagging (patrticularly suitable for light to medium washes
  • Avoidance of undesired strong contrasts in the 3D pleat area when bleaching; after 3D tagging
  • RUCON® X-FAC would give too strong contrasts in the 3 D pleat area

Chemical basis: Modified dihydroxyethylene urea, formaldehyde-free
Ionic character: Uncharged

RUCO®-PLAST BO

Additive for pleat fixation

Standard 100 by OEKO-TEX® (Suitable for class I-IV)
ZDHC MRSL compliant
Actual application for ZDHC Chemical Gateway: Level 0

  • Handle modifier and filling agent, especially as additive to resin finishing liquors.
  • Preferably used as filling agent for resin finishing
  • Improves the fastness to dry rubbing of dyeings
  • Suitable for temporary anti-curling finishes
  • Compatible with most handle modifiers and softening agents
  • Forms a very hard, non-elastic, transparent film
  • Not wash-resistant
  • Improves distinctly the scrapeability

Chemical basis: Polyvinyl alcohol
Ionic character: Non-ionic

GET IN TOUCH WITH US

RUDOLF GROUP offers strong solutions for the textile industry! We are happy to assist you in implementing the process on your articles.

CONTACT US